8K 60pCliqer 8K Video Wall Controller
One 8K signal in, four 4K outputs, pixel for pixel. Drive an LED wall from a single machine with no seam tearing.

- One 8K canvas in, over HDMI 2.1
- 7680 × 4320
- Full frame rate, in and out
- 60 Hz
- Outputs cut from one frame
- 4 × 4K
- Full HD screens of pixels per box
- 16 × HD
One frame, split four ways
Every port you need, nothing you don't
- 1
Network control
Web page and API on your network: pick the wall mode, set the bezels and update from a browser.
- 2
Two 8K inputs
HDMI 2.1 up to 8K 60 Hz (4:2:0, 8-bit) with HDCP 2.3. Switching inputs blanks the outputs for 2 to 3 seconds.
- 3
Four 4K outputs
Each output carries one quadrant of the 8K frame at up to 4K 60 Hz, or a scaled size down to 1080p or 720p.
- 4
Audio out
Analogue left and right on a terminal block, taken from the HDMI input, for a mixer or speakers.
- 5
RS232
Serial control from a show controller or control system, on a 3-pin terminal block.
- 6
12 V power
The adapter in the box, 100 to 240 V AC.
- 7
Input select
Switch between HDMI IN1 and IN2 from the front.
- 8
Bezel compensation
H+ and H- set the horizontal gap, V+ and V- the vertical, so the picture lines up across screen frames.
- 9
USB-C update
Firmware updates from a computer.
32 Full HD screens from one MacBook Pro
- 1
One MacBook Pro
M4 Pro or M4 Max, two 8K 60p outputs through two HDMI 2.1 adapters.
- 2
Two Cliqer boxes
Each takes one 8K frame and cuts it into four 4K outputs.
- 3
32 Full HD screens
Each 4K output runs a 2 × 2 wall of Full HD screens through their video wall mode, or an LED processor.
Specifications
- Inputs
- 2 x HDMI 2.1, up to 8K 60 Hz (4:2:0, 8-bit), HDCP 2.3
- Outputs
- 4 x HDMI, each up to 4K 60 Hz
- Wall mode
- 2x2: one 8K canvas split into four 4K quadrants, no scaling
- Resolutions
- 8K, 4K, 1080p, 720p, 576p and 480p at 24, 50 and 60 Hz
- Colour
- 24, 30 and 36-bit deep colour
- Audio
- Analogue L/R out on a 5-pin terminal block, taken from the HDMI input
- Control
- Front panel buttons, web page over Ethernet (RJ45), RS232 (3-pin terminal block), API commands
- Firmware
- Updates over USB-C or the web page
- Power
- 12 V DC, 3 A adapter included (100 to 240 V AC, 50 or 60 Hz)
- Size and weight
- 295 x 134 x 43.5 mm, 1 kg
- Operating range
- -15 to 55 °C, 5 to 90% humidity, non-condensing
- In the box
- Controller, power adapter, 2 mounting ears
Good to know
Ordering, delivery and returns
Put one frame on your whole wall
